Tag: Design + Automation

Multifunction Controls in a Bench DAQ

Benchtop

Multifunction Controls in a Bench DAQ

Bernard Ang 2019.10.11

What are multifunction controls in a bench DAQ? Most engineers who have used DAQ knows the many benefits and versatility of a bench data acquisition (DAQ) system. A DAQ has data logging capability tha

9 min read

#Data Acquisition #Design + Automation #Manufacturing Test

Advanced Switch Matrix to Streamline Tests

Benchtop

Advanced Switch Matrix to Streamline Tests

Bernard Ang 2019.09.05

Test instruments tend to have limited measurement inputs and can measure one or two devices at a time. High volume manufacturing companies test their products by the hundreds or thousands of units per

8 min read

#Data Acquisition #Manufacturing Test #Design + Automation

Advanced Triggering and Fast Measurement Throughput with a Multimeter

Benchtop

Advanced Triggering and Fast Measurement Throughput with a Multimeter

Choon-Hin Chang 2019.09.05

Advanced Triggering Traditional DMMs gives you essential triggering functions. They typically make measurements right after you configure and execute the measurement using the immediate auto-trigger,

10 min read

#Digital Multimeters #Manufacturing Test #Design + Automation

Digitizing Measurements with a DMM Isn't a Dream

Benchtop

Digitizing Measurements with a DMM Isn't a Dream

Bernard Ang 2019.08.14

Multimeters of the past were analog with an analog needle pointing to a measurement scale on a meter dial. Such analog multimeters cannot detect fast changes from your measurement signals. Analog mult

5 min read

#Digital Multimeters #Manufacturing Test #Design + Automation

EM Simulation Technology and When to Use It

Simulation + Design

EM Simulation Technology and When to Use It

Anna McCowan 2019.04.18

High frequency system design is hard. If you’ve ever tried it, you know what I’m talking about. High frequency systems are complex, and they are becoming more and more common. This means your challeng

5 min read

#Design Software #Design + Automation

Three Ways a TestOps Approach Cuts Down Waste

Industry Insights

Three Ways a TestOps Approach Cuts Down Waste

Kaelly Farnham 2019.04.01

How many circuit boards do you have laying around? As I look around at our office of electrical engineers, I see lots of circuit boards and test equipment. I wonder how many of our electronics go to e

6 min read

#Design + Automation #Design Software #Manufacturing Test #Environmental Sustainability #Sustainability